Find Answers To All Your Questions
DustDog is a modular, quick-connect dust collection ductwork system designed specifically for woodworking. It uses a universal flange and Quick Clamp connection method to allow easy installation, reconfiguration, and maintenance — without glue, screws, or tape.
DustDog is ideal for:
All DustDog fittings are 3D printed in the USA for on-demand production and fast turnaround.
PVC plumbing fittings are designed for water, not airflow. They have sharp bends, limited sizing options, and permanent glued joints that make reconfiguration difficult. DustDog fittings are engineered for airflow efficiency, tool-free reconfiguration, multi-pipe compatibility, and airtight performance.
Yes. We can design and produce custom adapters or fittings to fit unique machine ports or specialized applications.
Yes. Airtight seals prevent air leaks that can create whistling or hissing sounds in your ductwork.
Yes. Our fittings are designed with smooth, sweeping curves to reduce turbulence and maintain airflow, unlike PVC fittings with sharp corners.
You can contact us through DustDog.org/contact or join the community on platforms like MakerWorld to share tips and ideas.
Our TPU gaskets are highly durable, but can be replaced if damaged. Replacements are inexpensive and easy to install.
DustDog fittings are made from rugged PETG plastic, designed for years of shop use. They resist impact, temperature fluctuations, and general wear.
Simply unclamp the fitting, remove it, and clean it with compressed air, or a shop vac. Reinstall by clamping it back in place.
Yes. DustDog is an open-source standard, meaning anyone can design and produce compatible parts.
Our TPU flange gaskets create leak-tight connections, improving suction and reducing noise without the need for duct tape or silicone.
DustDog supports pipe sizes from 2", 2.5", 3", 4", 5", 6", and 8" across all four supported pipe types — more options than Rockler, Woodcraft, and Lee Valley combined.
You can order directly from our website at DustDog.org. We also provide free 3D printable models for personal use.
Yes. All connections are made using our Quick Clamps, which secure flanges together with an airtight seal. No glue, screws, or special tools required.
Absolutely. One of DustDog’s biggest advantages is reconfigurability. You can disconnect, relocate, or replace components in minutes without cutting pipe or buying new fittings.
On average, DustDog systems can be installed 45% faster than PVC plumbing-based dust collection systems.
DustDog supports four pipe types:
You can mix and match these pipe types within the same system thanks to our universal flange standard.
Current DustDog supports 8", 7", 6", 5", 4", 3" 2.5" and 2".
Yes. With our machine adapters and flange adapters, you can integrate DustDog fittings into most existing setups without replacing your entire system.
Yes. We offer custom machine adapters designed to match the dust port dimensions of your specific tools.
If you find a dust port we don't support email us and we will design one for you. Send us an email at support@dustdog.org with the name of your tool, the manufacturer and the outside diameter of your tools dust port. Cost to you is free.
Yes, 3D print models for every flange, clamp and fitting are available for free on **MakerWorld.com for you to use.
Yes. Through our partner program, we promote and may even produce your compatible designs.
No, you are free to use for your own personal use but only DustDog can sell fittings.
No, you are free to use for your own personal use but only DustDog can sell fittings.
DustDog is a modular, quick-connect dust collection ductwork system designed specifically for woodworking. It uses a universal flange and Quick Clamp connection method to allow easy installation, reconfiguration, and maintenance — without glue, screws, or tape.
DustDog is ideal for:
All DustDog fittings are 3D printed in the USA for on-demand production and fast turnaround.
PVC plumbing fittings are designed for water, not airflow. They have sharp bends, limited sizing options, and permanent glued joints that make reconfiguration difficult. DustDog fittings are engineered for airflow efficiency, tool-free reconfiguration, multi-pipe compatibility, and airtight performance.
Yes. We can design and produce custom adapters or fittings to fit unique machine ports or specialized applications.
Yes. Airtight seals prevent air leaks that can create whistling or hissing sounds in your ductwork.
Yes. Our fittings are designed with smooth, sweeping curves to reduce turbulence and maintain airflow, unlike PVC fittings with sharp corners.
You can contact us through DustDog.org/contact or join the community on platforms like MakerWorld to share tips and ideas.
Our TPU gaskets are highly durable, but can be replaced if damaged. Replacements are inexpensive and easy to install.
DustDog fittings are made from rugged PETG plastic, designed for years of shop use. They resist impact, temperature fluctuations, and general wear.
Simply unclamp the fitting, remove it, and clean it with compressed air, or a shop vac. Reinstall by clamping it back in place.
Yes. DustDog is an open-source standard, meaning anyone can design and produce compatible parts.
Our TPU flange gaskets create leak-tight connections, improving suction and reducing noise without the need for duct tape or silicone.
DustDog supports pipe sizes from 2", 2.5", 3", 4", 5", 6", and 8" across all four supported pipe types — more options than Rockler, Woodcraft, and Lee Valley combined.
You can order directly from our website at DustDog.org. We also provide free 3D printable models for personal use.
Yes. All connections are made using our Quick Clamps, which secure flanges together with an airtight seal. No glue, screws, or special tools required.
Absolutely. One of DustDog’s biggest advantages is reconfigurability. You can disconnect, relocate, or replace components in minutes without cutting pipe or buying new fittings.
On average, DustDog systems can be installed 45% faster than PVC plumbing-based dust collection systems.
DustDog supports four pipe types:
You can mix and match these pipe types within the same system thanks to our universal flange standard.
Current DustDog supports 8", 7", 6", 5", 4", 3" 2.5" and 2".
Yes. With our machine adapters and flange adapters, you can integrate DustDog fittings into most existing setups without replacing your entire system.
Yes. We offer custom machine adapters designed to match the dust port dimensions of your specific tools.
If you find a dust port we don't support email us and we will design one for you. Send us an email at support@dustdog.org with the name of your tool, the manufacturer and the outside diameter of your tools dust port. Cost to you is free.
Yes, 3D print models for every flange, clamp and fitting are available for free on **MakerWorld.com for you to use.
Yes. Through our partner program, we promote and may even produce your compatible designs.
No, you are free to use for your own personal use but only DustDog can sell fittings.
No, you are free to use for your own personal use but only DustDog can sell fittings.